Cohesive Elements
MAXSCRT
Field: yes History: yes .fil: no .dat: yes
Maximum nominal stress damage initiation criterion.
MAXECRT
Field: yes History: yes .fil: no .dat: yes
Maximum nominal strain damage initiation criterion.
QUADSCRT
Field: yes History: yes .fil: no .dat: yes
Quadratic nominal stress damage initiation criterion.
QUADECRT
Field: yes History: yes .fil: no .dat: yes
Quadratic nominal strain damage initiation criterion.
DMICRT
Field: yes History: yes .fil: yes .dat: yes
All active components of the damage initiation criteria.
SDEG
Field: yes History: yes .fil: yes .dat: yes
Overall scalar stiffness degradation.
STATUS
Field: yes History: yes .fil: yes .dat: yes
Status of the element (the status of an element is 1.0 if the element is active, 0.0 if the element is not).
The status output is added automatically by the analysis.
MMIXDME
Field: yes History: yes .fil: no .dat: no
Mode mix ratio during damage evolution. It has a value of -1.0 before initiation of damage.
MMIXDMI
Field: yes History: yes .fil: no .dat: no
Mode mix ratio at damage initiation. It has a value of -1.0 before initiation of damage.
출처 :
'ABAQUS > Subroutine' 카테고리의 다른 글
Abaqus 서브루틴 - GETJOBNAME / VGETJOBNAME - (0) | 2024.01.05 |
---|---|
Abaqus 서브루틴 - Results file (EL FILE) (1) | 2024.01.04 |
컴파일러 없이 Abaqus에서 서브루틴 실행 (0) | 2024.01.04 |
Abaqus 사용자 서브루틴 -URDFIL- 모든 키 읽기 (0) | 2024.01.04 |
Abaqus 결과 파일(.fil)에 액세스하기 위한 유틸리티 루틴 - POSFIL & DBFILE - (0) | 2024.01.03 |